Bandpass
A band-pass filter is a device that passes frequencies within a certain range and rejects (attenuates) frequencies outside that range. An example of an analogue electronic band-pass filter is an RLC circuit (a resistor-inductor-capacitor circuit). more...
 Home
12-Volt Portable Appliances
Car Alarms & Security
Car Amplifiers
Car Audio In-Dash Units
Car CD Changers
Car Speakers & Speaker...
Car Subwoofers & Enclosures
 Car Subwoofers
Enclosed Subwoofer Systems
Enclosures
 Custom-Fit Boxes
Dual Boxes
 Bandpass
Standard
Single Boxes
Triple or Larger Boxes
Car Video & Navigation
GPS Devices
Gadgets & Other Electronics
Installation Products
Other Car Audio & Video
PDAs/Handheld PCs
Parts & Accessories
Radar, Laser Detectors
Signal Processors
Vintage Electronics
Wholesale Car Audio Lots
Wholesale Lots
These filters can also be created by combining a low-pass filter with a high-pass filter.
An ideal filter would have a completely flat passband (e.g. with no gain/attenuation throughout) and would completely attenuate all frequencies outside the passband. Additionally, the transition out of the passband would be instantaneous in frequency. In practice, no bandpass filter is ideal. The filter does not attenuate all frequencies outside the desired frequency range completely; in particular, there is a region just outside the intended passband where frequencies are attenuated, but not rejected. This is known as the filter roll-off, and it is usually expressed in dB of attenuation per octave of frequency. Generally, the design of a filter seeks to make the roll-off as narrow as possible, thus allowing the filter to perform as close as possible to its intended design. However, as the roll-off is made narrower, the passband is no longer flat and begins to "ripple." This effect is particularly pronounced at the edge of the passband in an effect known as the Gibbs phenomenon.
Outside of electronics and signal processing, one example of the use of band-pass filters is in the atmospheric sciences. It is common to band-pass filter recent meteorological data with a period range of, for example, 3 to 10 days, so that only cyclones remain as fluctuations in the data fields.
In neuroscience, visual cortical simple cells were first shown by David Hubel and Torsten Wiesel to have response properties that resemble Gabor filters, which are band-pass.
Between the lower cutoff frequency f1 and the upper cutoff frequency f2 of a frequency band is the resonant frequency, at which the gain of the filter is at its maximum. The bandwidth of the filter is simply the difference between f2 and f1.
In his novel, V., Thomas Pynchon writes that a schematic for the band pass filter was the origin for the popular graffiti character, Kilroy.
Read more at Wikipedia.org
|
Here you can find a large selection of car alarms, security, amplifiers, audio, car CD/MP3 receivers, Garmin and Magellan GSPS devices, accessories, and cables, PDAs and handheld PCs.
