Batteries & Chargers
A battery charger is a device used to put energy into a cell or battery by forcing an electric current through that cell or battery. more...
Home
12-Volt Portable Appliances
Car Alarms & Security
Car Amplifiers
Car Audio In-Dash Units
Car CD Changers
Car Speakers & Speaker...
Car Subwoofers & Enclosures
Car Video & Navigation
GPS Devices
Gadgets & Other Electronics
Air Purifiers
Batteries & Chargers
Batteries
Alkaline Batteries
Rechargeable Batteries
Chargers & Testers
Other
Breathalyzers
Calculators
Clocks
Dictionaries & Translators
eBooks
Flashlight Key Chains
Fresnel Lenses
Home Automation
Language Filters
Laser Pointers
Laserdisc Players
Metal Detectors
Other Gadgets
Polygraphs
Radiation Detectors
RF Locators
Surveillance
Therapeutic Devices
Timers
Voltage Converters
Weather Devices
WebTV
Installation Products
Other Car Audio & Video
PDAs/Handheld PCs
Parts & Accessories
Radar, Laser Detectors
Signal Processors
Vintage Electronics
Wholesale Car Audio Lots
Wholesale Lots
The charge current depends upon the technology and capacity of the battery being charged. For example, the current that should be applied to a 12V car battery under charge will be very different to the current for a mobile phone battery.
Types of Battery Chargers
Simple
A simple charger works by connecting a constant DC power source to the battery being charged. The simple charger does not alter its output based on time or the charge on the battery. This simplicity means that a simple charger is inexpensive, but there is a tradeoff in quality. Typically, a simple charger takes longer to charge a battery to prevent severe over-charging. Even so, a battery left in a simple charger for too long will be weakened or destroyed due to over-charging.
Timer
Output as simple charger, but the output is terminated after a pre-determined time. Timer chargers were the most common type for Ni-Cd cells in the late 1990s for example.
Often a timer charger and set of batteries could be bought as a bundle, and the charger time was set to suit those batteries. If batteries of lower capacity were charged then they would be overcharged, and if batteries of higher capacity were charged they would be only partly charged. With the trend for battery technology to increase capacity year on year, an old timer charger would only partly charge the newer batteries.
Intelligent
Output current depends upon the battery's state. An intelligent charger may monitor the battery's voltage, temperature and/or time under charge to determine the optimum charge current at that instant. Charging is terminated when a combination of the voltage, temperature and/or time indicates that the battery is fully charged.
For NiCd and NiMH batteries, the voltage over the battery increases slowly during the charging process, until the battery is fully charged. After that, the voltage decreases, which indicates to an intelligent charger that the battery is fully charged. Such chargers are often labeled as a ΔV charger, indicating that they monitor the voltage change.
"15 minute" superfast
The VARTA-Rayovac group sell "15 minute" superfast chargers for special NiMH cells. The peculiarity of such chargers is that the charging process isn't only controlled in the charger, but also in the cells themselves. The special 15 minute cells are typically rated at 2000/2100mAh and contain control circuitry that makes such fast charging times possible without damaging the cells' elements. There are various models of 15 minute chargers. Most have a cooling fan to help keep the temperature of the cells under control. All of them are also capable of acting as a standard overnight charger if used with standard NiMH cells that do not have the special control circuitry.
Read more at Wikipedia.org
• [List your site here Free!]
|